SPECIFICATIONS
1GHz single-core processor 256MB of RAM
512MB of Internal Storage
MicroSD up to 32GB
Android 2.3.6 Gingerbread
3.2MP Rear Camera (No front camera)
GSM/GPRS/EDGE (900/1800MHz)
WiFi b/g/n with WiFi hotspot
Bluetooth 2.1 / microUSB 2.0
FM radio with 3.5 mm audio jack Motion Sensor
1,500 mAh Battery.
Hang on Cherry Mobile logo
Tools needed:
Open Factory Download then press number 1 to assign the PAC file needed by the handset. Press number 2 before you insert the handset and install the driver. Wait until you see the image below with Passed notification indicated that restore was successful.
All done!
kuaya panu po ito kc d ma detec ung akin ehh
ReplyDeleteBoss install mo muna tong driverhttps://androidmtk.com/install-spreadtrum-usb-driver-manually kapag windows 10 ka disable driver enforcer mo..m tapos switch of mo yung cp mo then hold volume up + volume down then connect the wire... Then proceed to flash
DeleteInstall this driver first click here https://androidmtk.com/install-spreadtrum-usb-driver-manually then disable windows driver enforcer if you're using windows 10.. Remove the battery of your phone. Then hold vol up and vol down. Then connect the wire then proceed to flash congrats... You're done
Delete