CELLMICRO

1.45" LCD screen Up to 10 WiFi devices connection 1500 mAh battery support 6 hours working time, 300 hours standby time WiFI 802.11 b/g/n Support Windows, MAC, i Phone, iPad and Android devices. Open NCK main software and navigate Huawei modems, select the model and type the IMEI of the device located at the back of device. Click Calculate Unlock Code and wait for the calculated codes provided by the program. Insert the device in USB to the computer and install driver. Then send the calculated codes through USB and all done!

MyPhone Rio Fun still has enough processor from MediaTek.  MT6572M clocked at 1.3GHz. Mali-400 MP for graphics and 512MB of RAM . It doesn’t have the lags and can install apps directly to the microSD card.  Press and Hold Volume Down + Volume UP+Power Button simultaneously. Press Volume UP to enter Android System Recovery. You can follow my actual video below.

Android OS, v4.2 (Jelly Bean), Mediatek MT6572, Dual-core 1.3 GHz Cortex-A7 processor , Mali-400 GPU, TFT capacitive touchscreen, 5.0 inches (~64.0% screen-to-body ratio) in size and 480 x 854 pixels 196 ppi pixel density. Open NCK Android Mediatek Tool and locate the proper handset model.Hit direct unlock and insert the USB to the computer together with the handset when the software instructed you.  Then install drivers, CDC drivers is important must be downloaded at support area. When all drivers were installed correctly just  wait till the unlocking was all done. Wait in few minuets for installing the drivers. Done

TFT capacitive touchscreen, 16M colors, 5.0 inches (~66.0% screen-to-body ratio), Android OS, v4.4.4 (KitKat), Qualcomm MSM8916 Snapdragon 410, Quad-core 1.2 GHz Cortex-A53, GPU Adreno 306, LTE supported. Root first using Odin USB debugging must on then after root open Z3X software then check EFS clear and hit flash next, Wipe EFS and lastly Write Cert which you can downloaded the file later or contact me for Cert file and root file. Rooting Done Write Cert done.

Super AMOLED capacitive touchscreen 16M colors, 4.0 inches (~57.7% screen-to-body ratio), Corning Gorilla Glass, Android OS, v2.1 (Eclair), upgradable to v2.2 (Froyo), 16 GB and 512 MB RAM, 5 MP, 2592 x 1944 pixels, auto-focus. Root first using iRoot USB debugging must on then after root open software select the model and hit Unlock. Done

5 MP, 2592 х 1944 pixels, autofocus, LED flash, Android OS, v4.1.2 (Jelly Bean), 1 GHz dual-core Cortex-A9, 4 GB, 1 GB RAM and micro SD up to 32 GB. Root first using King Root USB debugging must on then after root open Z3X software select the model and hit Unlock. Done

Capacitive touchscreen 16M colors, 3.2 inches (~45.6% screen-to-body ratio), 320 x 480 pixels (~180 ppi pixel density), Android OS, v2.2 (Froyo), 3.15 MP, 2048 x 1536 pixels, LED flash and up to 32 GB micro sd. Root first using King Root USB debugging must on then after root open Z3X software select the model and hit Read Codes. This is very easy one.

Qualcomm MSM8225 Snapdragon S4 Play, Dual-core 1 GHz Cortex-A5, Adreno 203 GPU, IPS LCD capacitive touchscreen in  16M colors. Equipped with Android OS v4.1.2 (Jelly Bean) upgradable to v4.4.2 (KitKat) 8 MP, 3264 x 2448 pixels auto-focus LED flash. Download PC suite and install to your computer. Hold volume down before inserting USB to the handset without battery. The handset will automatically install all drivers needed by the system. Open PC Suite and go to Mobile device tab and navigate Restore Error. All done!

A dual-sim IPS capacitive touch screen Corning Gorilla glass 3 protection equipped with dual-core processor with 2Gb RAM.  This solution is for hang-up Zenfone 5 devices using command prompt and ADB server. Download ADB Fastboot Tool.  Download the firmware of your handset with exact SDK model for my device is WW.  Extract the ADB fastboot tool from adb folder to drive C:. T urn off your device and go to recovery mode by pressing power+ volume up and down until recovery appear then apply upadte from ADB option. Connect the handset with usb cable and open command prompt in the same folder with ADB Fastboot ang firmware in zip.  Check connection by typing adb devices, if there is device in list means the connection was successful. Type adb sideload (firmware file).zip then hit enter key.  Wait until the update is complete and this process is clean installation. File transfer is completed. Automatically copy and configure the syst...

Quad core Cortex A7 Mediatek MTK6589 CPU clock to operate at 1.2 GHz. For enhancing graphics, they have also included Power VR SGX GPU.  Using NCK repair box, I flashed this smartphone with special Scatter files which i will upload the ROM later. Its easy to flash when all the drivers were installed correctly. Sp_Flash_tool is the alternative free software for updating. The owner of this handset restored the settings resulted for the LCD driver  was corrupted. To avoid the problem this device must be rooted before restoring in factory settings.  This is at the back panel. Flashing complete. Tested and proven. Result after flashing. After flashing the IMEI will be lost, null and no network signal. I used Mobile Uncle apk application to re-write IMEI. Just click OK to update and reboot. Press *#06# to check the IMEI. All done for Samsung Note 3 clone black screen solution.  ...