CELLMICRO

Procedures Get the firmware and flasher here . Install MTK Android USB driver Extract the Flash tool and firmware Open Sp-FlashTool and assign the scatter file to Scatter Loading tab. Click Download and insert USB cable to the device.

Procedures: Get the firmware and flash tool from  here Extract the zip file containing the flash tool and firmware Open SpFlashtool, locate and assign the scatter file to Scatter-Loading tab. Connect the USB cable to the computer and device Install the driver then after that disconnect USB cable from device Hit Download and insert USB cable again to the handset

PROCEDURES Press volume down + power button to enter  recovery, use volume up to Select and volume down for Ok. Assign the arrow beside the recovery and press volume down to confirm. Then navigate the Data Wipe/factory Reset.

Procedures: Prepare your handset by setting to download mode Press Volume down + Menu + Power button Connect the handset to the computer via USB Open Z3x software  Select model J200f  Navigate Unlock tab Press Reset FRP and wait until the program says all done.

Procedures: First, backup the handset in full using also Merapi for safety Open Merapi Tool and navigate the Clear Virus Tab Be sure you have android Mtk driver installed in your system Click Clear Monkey Test tab and insert the device to the USB cable Wait until the program says all done. Lastly, turn on the handset and make a reset located in device settings