CELLMICRO

PROCEDURES: Get the full firmware and flasher here.  Credits to the owner. Install the drivers and flasher found at extracted folder. Assign the .img file at image tab. Proceed to upgrade and follow the guide below.

PROCEDURES Get the firmware  here.  Password "anT4". Credits to the files owner. Install MTK Android USB driver Extract the firmware. Load Flash Tool. Open Sp-FlashTool and assign the scatter file to Scatter Loading tab. Click Download and insert USB cable to the device. Note: Be sure the tablet was detected by USB port before flashing

PROCEDURES Get the Pac File here .  Download UpgradeDownload Open Upgrader  Follow the number marked in the image shown below Click the number 1 to load the Pac file Click number 2 to start downloading

PROCEDURES: Get the firmware  here. Get the flasher  here. Install MTK Android USB driver Extract the firmware and flasher  Load Flash Tool. Assign the scatter file to Scatter Loading tab. Click Download and insert USB cable to the device. If you received an error 6010, flash first with Pre/patch found  here   and full flash it again. Pre/patch for error 6010 Full flashing Credits to the owner of all the files.

Get the Pac File here .  Download UpgradeDownload Open Upgrader  Follow the number marked in the image shown below Click the number 1 to load the Pac file Click number 2 to start downloading