Cherry Mobile Fusion Aura Hang on Logo

PROCEDURES:


  • Get the full firmware and flasher here. Credits to the owner.
  • Install the drivers and flasher found at extracted folder.
  • Assign the .img file at image tab.
  • Proceed to upgrade and follow the guide below.













Comments

Post a Comment

Popular posts from this blog

Huawei Honor H30-U10 Hang on Logo, Fixed!

Image
PROCEDURES: Get the firmware  here. Get the flasher  here. Install MTK Android USB driver Extract the firmware and flasher  Load Flash Tool. Assign the scatter file to Scatter Loading tab. Click Download and insert USB cable to the device. If you received an error 6010, flash first with Pre/patch found  here   and full flash it again. Pre/patch for error 6010 Full flashing Credits to the owner of all the files.
READ MORE »

How to Fix Samsung Galaxy s5830i with Samsung Logo Only on Screen.

Image
Using this free software, we can fix our Galaxy S5830i mobile. Here are some steps of programming. 1. Download the Samsung S5830i firmware  here . 2. Download ODIN software updater  here . 3. Go to  download mode by pressing menu, volume down and power on. 4. When you see the android logo press volume up for the target. 5. Open Odin updater and insert the phone in the USB to install driver. 6.  Be sure you have Samsung USB driver. 7. Assign the files in their proper location. 8. Then press start. These are the arrangement of files in their proper location PIT- S5830i_cooperve_0623.pit BOOTLOADER- DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.md5 PDA- PDA_S5830iJPLB1_REV00.tar.md5 PHONE- MODEM_S5830iXXLB1_REV00.tar.md5 CSC- GT-S5830i-MULTI-CSC-OJPLA5.tar.md5 Done.
READ MORE »